PokeRepair
We also buy damaged Pokemon cards!Sell Here

Card Restoration
Tools & Supplies

The inspection, cleaning, pressing, bench, packing, and slab-cracking tools we use on Pokemon cards — grouped by job, with a short note on how each one fits restoration work.

Inspection

See surface wear, residue, and edge damage before you work a card — and light the bench so you can confirm the result after.

  • TOMLOV TM4K-AF Max 4K Autofocus Microscope

    TOMLOV

    TOMLOV TM4K-AF Max 4K Autofocus Microscope

    High-magnification bench scope for inspecting holo scratches, fiber lifts, print defects, and edge wear before and after restoration. Autofocus and the 10.1" screen make it easier to document work without constantly refocusing.

    View on Amazon
  • TOMLOV DM9B 7" Digital Microscope

    TOMLOV

    TOMLOV DM9B 7" Digital Microscope

    A compact LCD microscope for checking centering, corner wear, surface film, and leftover debris on Pokemon cards. Useful for intake photos and a final pass before a card goes back in a sleeve.

    View on Amazon
  • DARKBEAM 395nm UV Flashlight

    DARKBEAM

    DARKBEAM 395nm UV Flashlight

    A 395nm black light reveals leftover adhesive, tape residue, stains, and fluorescent coatings that regular room light misses. Handy for checking a card after a clean and for spotting residue on acrylic press plates.

    View on Amazon
  • Jeedefi 10X Clamp Magnifier Lamp

    Jeedefi

    Jeedefi 10X Clamp Magnifier Lamp

    A clamp-on 10X real-glass magnifier with a dimmable LED ring for close surface, edge, and corner work when you do not need the full microscope. Hands-free swing arm keeps both gloves on the card instead of holding a loupe.

    View on Amazon
  • Evershop Overhead Ring Light (10")

    Evershop

    Evershop Overhead Ring Light (10")

    Overhead, shadow-free light for intake photos, before/after shots, and video of the bench. Color temperature and brightness stay even across the card so holo scratches and edge wear read the same in documentation as they do under the scope.

    View on Amazon

Cleaning and Polishing

Card-safe spray, polish, and lint-controlled applicators for surface dirt, oils, leftover film, and holo haze.

  • Kurt's Care Kit

    Kurt's Card Care

    Kurt's Care Kit

    Spray, polish, the Card Tool, a 6x6 mat, microfiber, applicator sticks, and cotton rounds in one kit. A starting bench for cleaning, polishing, and light edge work on Pokemon cards — practice on a base card first.

    View on Kurts Card Care
  • Kurt's Card Care Spray

    Kurt's Card Care

    Kurt's Card Care Spray

    Quick-drying spray for fingerprints, smudges, and light film on vintage paper stock. Apply with a cotton round or foam swab so you are not leaving swirls. Not a soak-first step for every card — match it to the stock.

    View on Kurts Card Care
  • Kurt's Card Polish

    Kurt's Card Care

    Kurt's Card Polish

    Abrasive-free polish for glossy and holo finishes — Prizm-style coatings, refractors, and Pokemon holos that look dull or show age film. Restore shine after a clean; always test on a base card before a chase copy.

    View on Kurts Card Care
  • Kurt's Card Care Recovery

    Kurt's Card Care

    Kurt's Card Care Recovery

    Ultra-fine cut polish for light scratches, swirl marks, and factory lines on rigid plastic finishes — Chrome, Prizm, Optic, and most TCG holos. Not for paper stock, autographs, or serial numbers. Try a base card first.

    View on Kurts Card Care
  • Lint-Free Cotton Rounds (300 count)

    RAINFLOW

    Lint-Free Cotton Rounds (300 count)

    Soft, lint-free pads for applying cleaner and lifting surface dirt, fingerprints, and oil film from card stock and holos. Toss after each card so you are not spreading debris to the next one.

    View on Amazon
  • Individually Wrapped Cotton Swabs (200 count)

    Le Miju

    Individually Wrapped Cotton Swabs (200 count)

    Single-use swabs for corners, edges, and tight print lines where a pad is too wide. Individual wrap keeps unused tips clean so you are not putting dusty cotton on a vintage card.

    View on Amazon
  • Foam Cleaning Swabs (100 count)

    CARGEN

    Foam Cleaning Swabs (100 count)

    Flat foam tips that hold cleaner or polish without shedding cotton fibers. Better than a pad for edges and a wider face than a cotton swab — apply, lift residue, then toss so you are not putting grit back on the next card.

    View on Amazon

Flattening & pressing

Humidity, heat, and even pressure to relax paper fibers and reduce waves, bends, and crease memory.

  • DigNew Card Repair & Flattening Kit

    DigNew

    DigNew Card Repair & Flattening Kit

    A humidity box with a hygrometer plus pads, clips, acrylic discs, cloths, and swabs. The box conditions card stock so waves and bends can be pressed flatter without forcing dry, brittle paper.

    View on Amazon
  • VEVOR 12x10 Heat Press

    VEVOR

    VEVOR 12x10 Heat Press

    A clamshell press for controlled heat and even pressure on a card sandwich (foam, parchment, acrylic). Used to relax paper fibers and reduce waves, light bends, and some crease memory — not for printing shirts.

    View on Amazon
  • WRINGKIT Silicone Heat Press Mat (15x12, 2-pack)

    WRINGKIT

    WRINGKIT Silicone Heat Press Mat (15x12, 2-pack)

    A thick silicone pad under the press so heat and pressure spread evenly instead of concentrating on one spot. Protects the platen and helps keep a card sandwich from getting a hard press mark.

    View on Amazon
  • 6x6 Acrylic Press Sheets (1/8", 6-pack)

    Lesnlok

    6x6 Acrylic Press Sheets (1/8", 6-pack)

    Rigid, card-sized plates for a press or clamp sandwich. Two clean sheets keep pressure even across the face and back so the card flattens instead of curling around a soft pad.

    View on Amazon
  • Blue Ribbon Plexi-Clean Acrylic Cleaner

    Blue Ribbon

    Blue Ribbon Plexi-Clean Acrylic Cleaner

    Anti-static cleaner for the acrylic sheets used as press plates. Dust, fingerprints, and haze on a plate transfer onto the card under heat or clamp pressure — clean plates first.

    View on Amazon
  • 6x6 Precut Parchment Sheets (300 count)

    UBeesize

    6x6 Precut Parchment Sheets (300 count)

    Heat-safe barrier paper between the card and acrylic so ink, holo, and stock do not stick or scorch. Precut 6x6 squares match the acrylic plates and keep raw paper fibers off the card.

    View on Amazon
  • Black EVA Foam Sheets (9x12, 2mm, 30-pack)

    Better Office Products

    Black EVA Foam Sheets (9x12, 2mm, 30-pack)

    Soft pressure-distribution pads cut down to card size and stacked in the sandwich. Foam keeps the press from leaving a hard platen imprint and helps even out small surface irregularities.

    View on Amazon
  • IRWIN QUICK-GRIP Mini Bar Clamps (6", 4-pack)

    IRWIN

    IRWIN QUICK-GRIP Mini Bar Clamps (6", 4-pack)

    One-handed clamps for a cold-press acrylic sandwich after humidity work. Four clamps around a 6x6 stack hold even pressure while a card dries flat without putting it back in the heat press.

    View on Amazon
  • HORUSDY 6" Bar Clamps (2-pack)

    HORUSDY

    HORUSDY 6" Bar Clamps (2-pack)

    A second pair of quick-grip clamps for extra press sandwiches on the bench. Soft jaw pads help keep acrylic plates from slipping or marking while a card sits under even pressure.

    View on Amazon

Surface & edge work

Bone, metal, and silicone-tipped tools for localized edge, dent, and surface work after the card is cleaned and conditioned.

  • Kurt's Card Tool

    Kurt's Card Care

    Kurt's Card Tool

    A purpose-built tip for minor dings and dents on corners and edges of vintage through modern cards. More control than a generic ball stylus on card stock — still conditioned paper only, and practice on a base card first.

    View on Kurts Card Care
  • Genuine Bone Folder Set (2-piece)

    VENCINK

    Genuine Bone Folder Set (2-piece)

    Polished cattle-bone folders for burnishing, scoring, and evening card stock after it is conditioned. The pointed tip reaches corners and tight crease lines; the wide end smooths a scored area without the drag of plastic.

    View on Amazon
  • Ball-End Dotting Tools (10-piece)

    HSYMQ

    Ball-End Dotting Tools (10-piece)

    Stainless steel ball tips from 0.8mm to 18mm for localized pressure on dents, dings, and tight edge wear after the stock is conditioned. Pick a tip that matches the mark so you are not flattening a wider area than you meant to.

    View on Amazon
  • Stainless Steel Roller & Gua Sha

    Bealihelp

    Stainless Steel Roller & Gua Sha

    Smooth metal faces for localized pressure on edges and small dents after the stock is conditioned. The roller spreads force more evenly than a fingertip; the gua sha edge is for careful, controlled contact — never dry, brittle paper.

    View on Amazon
  • Silicone Clay Sculpting Tools (10-piece)

    Yagugu

    Silicone Clay Sculpting Tools (10-piece)

    Soft silicone tips and fine stylus ends for working cleaner into edges, lifting debris, and burnishing small areas without scratching holo. The flexible tips reach corner whitening that a cotton pad cannot.

    View on Amazon

Protection & bench

Keep oils off the card and dust out of the air while cards are on the bench.

  • Shark NeverChange Air Purifier HP152

    Shark

    Shark NeverChange Air Purifier HP152

    A compact HEPA-exceeding purifier that pulls dust, dander, and airborne debris out of the workshop while cards are out of sleeves. Cleaner air means less grit landing on holos, press plates, and wet-clean surfaces — and the NeverChange filter stays on the bench for years instead of swapping cartridges mid-job.

    View on Amazon
  • Schneider Black Nitrile Exam Gloves

    Schneider

    Schneider Black Nitrile Exam Gloves

    Powder-free nitrile so skin oils, fingerprints, and lotion never transfer onto a card during cleaning or press work. Thin enough for tactile control under a microscope; textured fingertips help grip sleeves and acrylic.

    View on Amazon

Slab cracking

Open PSA, BGS, and CGC slabs so a graded card can come out for restoration — then go back in a sleeve, not the old holder.

  • HOUSERAN 8" End Cutting Pliers

    HOUSERAN

    HOUSERAN 8" End Cutting Pliers

    Flush end-cutters for nipping the slab weld and acrylic lip so a PSA, BGS, or CGC case opens without twisting force into the card. Short, controlled bites — not a pry that can shock the holder into the corners.

    View on Amazon
  • Klein Tools Bottle Opener

    Klein Tools

    Klein Tools Bottle Opener

    A compact shop pry for lifting a nipped slab face once the weld is cut. The cushion grip stays put in a gloved hand so you are not using fingernails or a thin blade next to the card.

    View on Amazon

Packing & return

Sleeve, topload, and ship cards the same way we pack returns from the workshop.

  • SEFOWG Clear Card Sleeves (2400 count)

    SEFOWG

    SEFOWG Clear Card Sleeves (2400 count)

    Standard-size penny sleeves for every card that leaves the bench. Soft inner sleeve first, then a toploader or semi-rigid — the same stack we use so a restored card does not pick up fresh scratches on the way back to you.

    View on Amazon
  • QTYORD Toploaders + Soft Sleeves (500+500)

    QTYORD

    QTYORD Toploaders + Soft Sleeves (500+500)

    3x4 hard toploaders paired with soft sleeves for finished cards. After restoration, the card goes sleeve-then-toploader so it cannot flex, ding a corner, or pick up debris in transit.

    View on Amazon
  • PJU Semi-Rigid Holders + Sleeves (200+200)

    PJU

    PJU Semi-Rigid Holders + Sleeves (200+200)

    Semi-rigid card savers with matching soft sleeves for cards heading to PSA, BGS, SGC, or CGC. Larger and more flexible than a toploader — the format graders expect, not a hard case.

    View on Amazon
  • Ding Defend 4x6 Shipping Protectors (110 pack)

    Storage Standard

    Ding Defend 4x6 Shipping Protectors (110 pack)

    Thin 4x6 plastic shippers that replace cardboard around a sleeved toploader, semi-rigid, or slab. Rounded corners and a waterproof sheet keep a packed return from taking a ding through the envelope or box.

    View on Amazon
  • Comnge Resealable Team Bags (500 count)

    Comnge

    Comnge Resealable Team Bags (500 count)

    Clear resealable team bags that go over a sleeved toploader or magnetic holder before it hits the mailer. Acid-free, non-PVC plastic keeps moisture and grit off a finished card; one bag holds a single packed card or a small stack of toploaders.

    View on Amazon

Prefer we do the work?

Mail-in Deep Clean + Polish starts at $29.95 and Full Restoration at $89.95. Heat, humidity, and edge work can damage a card if they are not matched to the stock — we will take it from here.

Start mail-in order